CAROL BIKE 2.0, Setup And User Manual

Page: 14 / 28

STEP 8
Setting up the power
supply
•
The bike is powered by a 12V 5A supply
(pictured).
• Locate the power socket label under the
flywheel, the power socket is under the frame
near the rear stabiliser (pictured) and insert
the power cable. Plug the power chord into a
nearby power outlet and turn on.
• The power supply is designed for 110-240V
operation.
• The bike motor will be heard running through
a setup procedure for a second or two. This
means your bike is receiving power and is
ready for use.
Cleats
You can use these cleats with any cycling shoes
compatible with the SPD cleat SM- SH51 system
to clip into the underside of the CAROL Bike 2.0
pedals.
These are very common and compatible with
cycling shoes from many manufacturers.
14 | CAROL
CAROL Bike 2.0 assembly
STEP 8
Setting up the power
supply
•
The bike is powered by a 12V 5A supply
(pictured).
• Locate the power socket label under the
flywheel, the power socket is under the frame
near the rear stabiliser (pictured) and insert
the power cable. Plug the power chord into a
nearby power outlet and turn on.
• The power supply is designed for 110-240V
operation.
• The bike motor will be heard running through
a setup procedure for a second or two. This
means your bike is receiving power and is
ready for use.
Cleats
You can use these cleats with any cycling shoes
compatible with the SPD cleat SM- SH51 system
to clip into the underside of the CAROL Bike 2.0
pedals.
These are very common and compatible with
cycling shoes from many manufacturers.
14 | CAROL
CAROL Bike 2.0 assembly
STEP 8
Setting up the power
supply
• The bike is powered by a 12V 5A supply
(pictured).
•
Locate the power socket label under the
flywheel, the power socket is under the frame
near the rear stabiliser (pictured) and insert
the power cable. Plug the power chord into a
nearby power outlet and turn on.
•
The power supply is designed for 110-240V
operation.
•
The bike motor will be heard running through
a setup procedure for a second or two. This
means your bike is receiving power and is
ready for use.
Cleats
You can use these cleats with any cycling shoes
compatible with the SPD cleat SM- SH51 system
to clip into the underside of the CAROL Bike 2.0
pedals.
These are very common and compatible with
cycling shoes from many manufacturers.
14 | CAROL
CAROL Bike 2.0 assembly