20
Satellite position "1" Satellite position "2"
After having selected a channel at the receiver, the position number of
the satellite assigned to this channel in the receiver must be displayed.
This is essential for ensuring that the system functions correctly.
If
this is not the case, do not continue the configuration process, as the
DISEqC function will definitely not work. For corrective measures in
case of display errors please refer to the fault table on page 24.
In our example, the figure 01 should be displayed when an Astra channel is selected,
as Astra has been assigned to position A (1). When switching to a Hotbird channel,
the figure 02 should be displayed, as this satellite has been assigned to position B (2).
If the position display functions correctly, the satellite position is
assigned to the corresponding satellite in the CARO control panel. To
do this, select the menu option "SAT position" (see page 17).
In our example, we now assign position 1 to the Astra 1 satellite, and position 2 to
the Eutelsat-Hotbird satellite.
After performing this setting, select the function "DISEqC On/Off" at
the control panel (see page 15) and then select
( DISEqC:ON ) by pressing
.
The configuration is now complete. You may now exit the settings
menu.
