4
The first steps
We have produced a separate manual – the “Installation Instructions” –
which covers the installation, wiring and initial taking into operation of
your CARO. All of the steps from unpacking and installing the system to
switching it on for the first time are explained there, together with
various default settings that need to be performed. If you have worked
through all of the points in the Installation Instructions then you should
now have a fully functional CARO at your disposal.
All controls are handled via the control panel.
Vision
You may choose any location you like to install the control panel, but
please bear in mind that it is not waterproof. You may still need to
remove the protective film from the system.
The display of the control panel will show the various current operating
modes of the system. We recommend that the control panel is
positioned in an accessible location where it is easy to see this
information. The display is lit up, so it is not a problem if it is installed in
a very dark location.
