Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
13
SPEEDCHECK-15/18 USER MANUAL
2.0 SYSTEM OVERVIEW
2.6 Typical Configurations – SPEEDCHECK-15/18 – External Beacons
Connection points for the SPEEDCHECK-15 output harness can be found in the junction box at the top of the
enclosure. Outputs from the SpeedCheck controller are suitable for powering standard 12V, circular LED
beacons, that contain internal LED drivers. See
for more information on circular beacon installation.
To access the SPEEDCHECK-18 controller,
remove four screws. Beacon cables are pre-
installed if ordered. Otherwise, install a ¾”
conduit fitting to route external 12” circular
beacons using the color code shown below (red
positive, black negative)
SPEEDCHECK-18 alternate point of
connection for external beacons:
SPEEDCHECK-15 Junction Box
Circular Beacon Installation Example
SPEEDCHECK-18 Beacon
cables are factory installed to
terminal block.
RED|BLACK|BLACK|RED
