Carlton SP8018, Owner'S Manual, Page: 74 / 96

4
1.5 SAFE LIFTING AND HANDLING OF TRACK SYSTEMS
Always check the weight stamped on the identification plate before lifting or moving the track
system.
For reasons of safety and even weight distribution, always use two chains or slings
in the positions shown below.
Ensure the adjoining sling which connects the chains to the crane hoist has an adequate load
rating.
The below image demonstrates a track system being safely lifted with slings. The belt lugs
prevent the belt from slipping, for this reason, choker chains are not necessary.
Precautions
•
Chains, slings and hoists are identified by their safe-load lifting capabilities
•
Do not lift loads exceeding the rated capacity of chains, sling or hoists
•
Raise and lower the track system slowly and avoid quick starts or stops
•
When moving the raised track system, always keep it as close to the floor as
possible.