CARLO GAVAZZI G38900014, User Manual

Page: 33 / 42

G38xx14 Configuration Software
Function Code 03: Read Multiple Registers
Register
Address Register 16 bit
Dec Hex Hi Lo
0 0 B8..B1 A8..A1 Digital
1 1 D C Digital
. . . . .
6 6 N M Digital
7 7 P O Digital
Reads Dupline transmitters (DI).
Reading of 1 to 8 registers possible.
If an attempt is made to read from a start-address and the number of registers exceeds
the allowed register range, no answer will be made, as this is interpreted as an illegal
function
256 100 A1 0 0..255 Analink
257 101 A2 0 0..255 Analink
258 102 A3 0 0..255 Analink
. . . 0 0..255 Analink
382 17E P7 0 0..255 Analink
383 17F P8 0 0..255 Analink
Analog value only valid if channel is defined as an Analink sensor.
Reading of 1 to 8 registers possible
512 200 0 0..99 0..99 0..99 0..99 Counter
514 202 1 0..99 0..99 0..99 0..99 Counter
516 204 2 0..99 0..99 0..99 0..99 Counter
0..99 0..99 0..99 0..99 Counter
764 2FC 126 0..99 0..99 0..99 0..99 Counter
766 2FE
127 0..99 0..99 0..99 0..99 Counter
Counter value only valid if Counters are selected.
Reading of 1 to 8 registers allowed.
The response time for a Counter value may go up to 132 ms, to ensure data integrity
between all digits.
Dec Hex Mux Hi Lo Value
784 310 0 HI LO CD-0 Input Table
785 311 1 HI LO CD-1 Input Table
786 312 2 HI LO CD-2 Input Table
787 313 3 HI LO CD-3 Input Table
. . . . . . Input Table
798 31E E HI LO CD-E Input Table
799 31F F HI LO CD-F Input Table
800 320 0 HI LO EF-0 Input Table
815 32F F HI LO EF-F Input Table
816 330 0 HI LO GH-0 Input Table
831 33F F HI LO GH-F Input Table
832 340 0 HI LO IJ-0 Input Table
847 34F F HI LO IJ-F Input Table
848 350 0 HI LO KL-0 Input Table
863 35F F Hi LO KL-F Input Table
864 360 0 HI LO MN-0 Input Table
879 36F F HI LO MN-F Input Table
880 370 0 HI LO OP-0 Input Table
895 37F F HI LO OP-F Input Table
1000 1000 B8-B1 A8-A1 Digital
1001 1001 D C Digital
. . Digital
4103 1007 P O Digital
4880 1310 0 HI LO CD-0 Output Table
4881 1311 1 HI LO CD-1 Output Table
4882 1312 2 HI LO CD-2 Output Table
4883 1313 3 HI LO CD-3 Output Table
. . . . . . Output Table
4894 131
E
E HI LO CD-E Output Table
4895 131F F HI LO CD-F Output Table
4896 1320 0 HI LO EF-0 Output Table
4911 132F F HI LO EF-F Output Table
4912 1330 0 HI LO GH-0 Output Table
4927 133F F HI LO GH-F Output Table
4928 1340 0 HI LO IJ-0 Output Table
4943 134F F HI LO IJ-F Output Table
4944 1350 0 HI LO KL-0 Output Table
4959 135F F Hi LO KL-F Output Table
4960 1360 0 HI LO MN-0 Output Table
4975 136F F HI LO MN-F Output Table
4976 1370 0 HI LO OP-0 Output Table
4991 137F F HI LO OP-F Output Table
Multiplexed analog Read Input Table (AI)
Registers 0300H to 037FH BCD-VALUES
Resisters 0400H to 047FH BINARY-VALUES
Multiplexed analog values only valid if Multiplexer is selected
Reading of 1 to 8 registers possible
Dupline group AB holds the actual Mux-address on the 4 most significant bits. The
remaining bits holds the digital transmit information from channel A5..B8
Reads Dupline Receivers (DO).
Reading of 1 to 8 registers possible.
If an attempt is made to read from a start-address and the number of registers exceeds the
allowed register range, no answer will be made, as this is interpreted as an illegal function
Multiplexed analog Read Output Table (AO)
Registers 1310H to 137FH BCD-VALUES
Resisters 1400H to 147FH BINARY-VALUES
Multiplexed analog values only valid if Multiplexer is selected
Reading of 1 to 8 registers possible

2000 Carlo Gavazzi Industri A/S. All rights reserved.
32