G38xx14 Configuration Software
AnaLink Sensors
Motion Detector
Input range
defined for
Analink sensor
G8911 1010
-30
°
C to +60
°
C
Entry of the channel
with which to
disable the channel
With this control
output, the channel
can be used to
switch on a relay for
instance
Select this option to
invert the switching
function in relation
to the limit values
Entry of upper and
lower limit values
Select this option to
open a second
entry form into
which a second pair
of limit values can
be entered
Entry of the address
which is to enable
the second pair of
limit values
When selecting this
option, the Analink
signal is provided
by another Analink
channel.
Entry of the channel
from which the
alternative analog
value is to be read.
The motion
detector activates
the siren/alarm
signal in the
Intruder alarm.
When the Intruder
alarm is
activated, this
channel too may
give a signal to
start the Intruder
alarm
Number of allowed pulses within a 10
secs time frame before the motion
detector gives out its alarm signal
Entry of off delay
2001 Carlo Gavazzi Industri A/S. All rights reserved.
13
