,175$0$;3/86
&DUORGH*LRUJL
*%
12) “xx/x”: transmission ratio between motor and speed reducer or speed
multiplier (this parameter is set in accordance with the handpiece
installed); reducers are identified by the first digit, multipliers by the
second: e.g. 32/1 indicates that speed reducer 32 has been selected,
while 1/5 corresponds to speed multiplier 5; when the reducers or
multipliers are changed the torque (2 and 8) and speeds (11 and 14)
values are updated automatically on the display since these values
depend on the currently selected reducer or multiplier;
13) “SP-SW%”: graphic display of footswitch percentage speed
14) “Speed (rpm) “xxxxx”: shows the speed set
-
for the motor if no reducers or multipliers are selected;
-
for the spindle if a reducer or multiplier has been selected.
)LJ
