,175$0$;3/86
*%
&DUORGH*LRUJL
When you press the yellow button a continuous audible signal sounds to
indicate that the green (3) and red (4) buttons are active only in programming
mode and can therefore not perform their primary function of, respectively,
starting/stopping the water pump and reversing the direction of rotation of
tools. When you press yellow button (9) again the audible signal stops and
the green (3) and red (4) buttons are once more available to perform their
primary functions.
)LJ)LJ
Figure 8 shows the data that appear on the display as described below:
1)
“Step” indicates the sequential program number (from 00 to 31);
2)
“Torque” (Ncm) - “xxx”: describes the torque (power) available at the
tool tip;
3)
“Pump”: indicates the quantity of water delivered;
4)
indicates the direction of rotation of the micromotor selected;
5) “MM1/MM2”: indicates which of the two micromotors is selected
(MM1 or MM2);
6)
“PUMP %”: graphic display of the quantity of water delivered in
percentage;
7) “TORQUE %”: graphic display of the percentage value of the
torque (power) available at the tool tip;
8) “xx
·
xxx”: displays the torque (power) numeric interval that can be
used with the handpiece selected;
9)
“SPEED xxx : indicates the numeric value of the speed at the tool tip;
10) “ %”: graphic display of the percentage value of the tool tip
speed;
11) “xx
·
xxxx” : displays the numeric interval of the speed that can be
used with the handpiece selected;
00
00
