Carl Valentin SPX II, Manual

Page: 116 / 230

SPX II
116 English
Key:
Backfeed/Delay Backfeed: The backfeed was optimised in the operating modes dispenser (optional), cutter
(optional) and tear off. Now, when driving into the offset, the following label is 'pre-printed' if
possible and therefore the backfeed of label is no necessary and time can be saved.
Delay: The adjustable deceleration time is only for mode Backfeed automatic of importance.
Key:
Password By a password several functions can be blocked, so the user cannot work with them.
Key:
Label confirmation On: A new print order is only printed after confirmation at the device.
An already active continuing print order is printed as long as the confirmation is effected at the
device.
Off: No query appears at the display of control unit.
Key:
Standard label
On: If a print order is started without previous definition of label, the standard label is printed.
Off: If a print order is started without previous definition of label, an error message appears in
the display.
Key:
Synchronisation at
switching on Off: The synchronization is disabled, i.e. the measuring and label feed have to be released
manually.
Measure: After switching on the printer, the loaded label is automatically measured.
Label feed: After switching on the printer the label is synchronised to the beginning of label. For
this one or multiple labels are advanced.
Dispenser I/O
Keys: , , , ,
Operating mode
Press key to select the operating mode. The following possibilities are available:
I/O static, I/O static continuous, I/O dynamic, I/O dynamic continuous, Photocell and Photocell
continuous.
Key:
Dispenser photocell Value 1: Indication of the current sensor level.
This indication is for checking purposes and cannot be modified.
Value 2: Indication if a label (value = 1) or if no label (value = 0) was found.
This indication is for checking purposes if the set switch level leads to a correct label
recognition.
Value 3: Indication of switch level
Default: 1.2
Value 4: Transmission power of label sensor.
Depending on label material (color) the sensor level can be adapted in order to
permit a safe label recognition.
Value range
: 1 … 255
Default: 80