Carl Valentin SPX II, Manual

Page: 109 / 230

SPX II
English 109
Unpack the Print Module

Lift the print module out of the box.

Check the print module for transport damages.

Set up the print module on a flat surface.

Remove foam transportation safeguards near the printhead.

Check delivery for completeness.
Scope of Delivery

Print module.

Empty core, mounted on transfer ribbon rewinder.

Power cable.

Cleaning foil for printhead.

Data cable for USB interface.

Documentation.

I/O accessories
(female connectors for I/O, I/O 24 cable).

CD with printer drivers.

1 transfer ribbon roll.

Labelstar Office LITE.
NOTICE!
Retain original packaging for subsequent transport.
Setting up the print module
CAUTION!
The label printer and the print media can be damaged by moisture and water.

Set up the print module only in a dry place protected from sprayed water.

Mount the print module on a vibration-free and air draught-free.

Open cover of print module.

Remove foam transportation safeguards near the printhead.
Connecting the Print Module
The print module is equipped with a versatile power supply unit. The device may be operated with a mains voltage of
110-230 V / 50-60 Hz without any adjustments or modifications.
CAUTION!
The direct print module can be damaged by undefined switch-on currents.

Set de power switch to '0' before plugging in the direct print module.

Insert power cable into power connection socket.

Insert plug of power cable into a grounded electrical outlet.
NOTICE!
Insufficient or missing grounding can cause faults during operation.
Ensure that all computers and connection cables connected to the print module are grounded.

Connect print module to computer or network with a suitable cable.