Carl Valentin SPX II, Manual

Page: 113 / 230

SPX II
English 113
Print Settings
Keys: ,
Speed Indication of print speed in mm/s.
The print speed can be determined for each print order anew. The setting of print speed affects
also the test prints.
Value range: 50 mm/s
… 300 mm/s (see the technical data).
Contrast Indication of value to set the print intensity when using different materials, print speeds or printing
contents.
Value range: 10%
… 200 %.
Key:
Transfer ribbon control Examination if the transfer ribbon roll is to end or if the ribbon was torn at the unwinding roll.
Off: The ribbon control is deselected, i.e. the direct print module continues without an error
message.
On: The ribbon control is selected, i.e. the current print order is interrupted and an Error Message
appears at the display.
strong sensibility: The direct print module reacts immediately to the end of the transfer ribbon.
weak sensibility: The direct print module reacts at approx. 1/3 more slowly to the end of the
transfer ribbon.
Key:
Y displacement Indication of initial point displacement in mm.
Displacement of the complete print in paper direction. With positive values the print in paper
direction starts later.
Value range: −30.0 … +90.0.
Key:
X displacement Displacement of the complete print transverse to the paper direction.
The displacement is possible only up to the edges of the printing zone and is determined by the
width of the focal line in printhead.
Value range: −90.0 … +90.0.
Key:
Tear off Indication of value to which the last label of a print order is moved forward and is moved back to
the beginning of label at a new print start.
Value range: 0
… 50.0 mm
Standard: 12 mm.
Layout Settings
Keys: , ,
Label length Indication of label length in mm.
Minimum height: 15 mm
Gap length Indication of distance between two labels in mm.
Minimum value: 1 mm.
Key:
Column printing Indication of width of one label as well as how many labels are placed side by side.
Key:
Measure label
Press key to start measuring.
Key:
Label type
Generally adhesive labels are set. Press key to select continuous labels.