Carl Valentin SPX II Series Operating Manual Download

Page: 69 / 110

SPX II Series

Compact Flash Card / USB Memory Stick

03.17

Operating Manual

8.6 File Explorer

The File Explorer is the file manager of the printing system. The File
Explorer provides the main functions for the user interface of memory
menu.

In the user directory, press key

to access to the File Explorer.

Following functions are available:



Change drive and/or directory



Load file



Save layout and/or configuration



Delete file(s)



Format CF card



Copy file(s)

Selection of drive and/or directory in which the files are saved.

Press key

to access to the memory menu.

Press key

to call the File Explorer.

Press keys

to select the directory.

Press key

to confirm the selection.

The selected directory is now displayed.

Change drive/directory

Summary of Contents for SPX II Series















































































































Search results

Summary of Contents for SPX II Series

Reviews:

Related manuals for SPX II Series

Brands by name

Popular brands

Carl Valentin SPX II Series, Operating Manual

Search results

Summary of Contents for SPX II Series

Reviews:

Related manuals for SPX II Series

Brands by name

Popular brands