Spectra II Series
Additional information
10.16
Betriebsanleitung
71
In case at switching off the label printer a print order was active, then
a print start is released automatically and the required res. actual
number of printed labels is refreshed.
In case the print order was stopped at switching off the label printer, it
is again set to the stopped mode after switching on the label printer
anew.
In case a customized entry was active during switching off the label
printer, the window for the first customized variable is displayed.
As in the intended file only the start values of the counter are saved,
they are refreshed at a new start of the print order by means of the
number of printed labels. Each counter is counted corresponding from
its start value. Afterwards the position of the current and the next
counter update are correctly set by means of the update intervals.
NOTICE!
Make sure that in case graphics are onto the label they have to
be saved onto CF card.
Starting the print order
Refreshing the variable
counter