Carl Valentin Spectra II Series Operating Manual Download

Page: 25 / 82

Spectra II Serie

Installation

10.16

Operating Manual

Installation



Lift the label printer out of the box.



Check the label printer for transport damages.



Check delivery for completeness.



Label printer.



Power cable.



Empty core, mounted on transfer ribbon rewinder.



Tear-off edge (printers with option tear-off edge only).



Dispenser edge (printers with option dispenser only).



Cutter unit (printers with option cutter only).



Documentation.



Printer driver on CD ROM.



Labelstar Office LITE on CD ROM

NOTICE!

Retain original packaging for subsequent transport.

4.1 Setting up the Label Printer

CAUTION!

The label printer and the print media can be damaged by
moisture and water.



Set up the label printer only in a dry place protected
from sprayed water.



Set up label printer on a level, vibration-free and air draught-free
surface.



Open cover of label printer.



Remove foam transportation safeguards near the printhead.

Unpack the
label printer

Scope of delivery

Summary of Contents for Spectra II Series


















































































Search results

Summary of Contents for Spectra II Series

Reviews:

Related manuals for Spectra II Series

Brands by name

Popular brands

Carl Valentin Spectra II Series, Operating Manual

Search results

Summary of Contents for Spectra II Series

Reviews:

Related manuals for Spectra II Series

Brands by name

Popular brands