Cargo Floor B.V.
Byte 14
NL-7741 MK COEVORDEN
Phone:+31 (0)524-59 39 00
www.cargofloor.com
Replacing a cylinder CF500 SL-2 / CF500 SL-C
10-12-2013
/ NL 11 van 16
Place all the clamping plates back and tighten them with hand. Mount the guide block with the new M16x90
bolts and this also must be tightened by hand (fig. 23 en 24).
Now the cylinder should be given its proper place in the clamping plates. The cylinder itself should be in about
the same place as the cylinder next to it. Compare for this the front surfaces of the cylinder lids (fig. 26).
If all cylinders are replaced they should line up, but the first cylinder should in the first place be situated in
about the middle of the thread of the cylinder. If the cylinders have the correct position, the clamping plates can
be slightly further being tightened. But still not completely be fastened (fig. 25 en 26).
Fig. 23
Fig. 24
Fig. 25
Fig. 26
