Changing the Batteries cont:
2.
To change the Wireless Pendant battery you will need a
small Phillips head screwdriver. This Wireless pendant is very
delicate and so care should be taken when changing this
battery. As shown in Fig 1 diagram below, undo the 4 screws
and carefully change the 12 Volt (23A) battery ensuring that
the battery polarity is correct (+ve & -ve). Replace the cover
correctly and secure it with the screws.
These Screws should
be relatively tight without using excessive force
! But ensure
the backing plate has pressed tight to the cover.
After changing the rechargeable battery it is important that
you test the unit for correct function.
( 18 )
A warning voice message will sound “mains power is not detected” and will
play every ten minutes to warn you that the 240v is not present.
12
