background image

Precautions and Maintenance

1.   To  reduce  the  risk  of  electric  shock,  do  not  attempt  to  open  the  Smart 

Dialler unit. 

2.   When  replacing  the  9  Volt  rechargeable  battery  ensure  that  your 

replacement  is  also  a  9  Volt  rechargeable  battery.  Un-plug  both  the 
incoming  phone  line  and  the  power  supply  to  the  Smart  Dialler  when 
performing this change.

3.   The positioning of the Smart Dialler is closely related to its receiving range 

performance.  Avoid  placing  the  Smart  Dialler  on  top  of  other  electrical 
appliances such as TV’s, Computers, Microwaves, metal cabinets etc. Also 
avoid placing the Smart Dialler on the floor or in a corner of a room.

4.   Ensure  that  the  Smart  Dialler  is  not  positioned  in  places  liable  to  dust 

and dirt, high temperature, direct sunlight, steam or excessive moisture. 
Always treat the Smart Dialler with care.

5.   Only  use  a  dry  cloth  to  clean  the  Smart  Dialler,  never  use  any  cleaning 

products or moisture when cleaning.

6.   For  increased  performance,  ensure  that  the  Smart  Dialler  antenna  is 

moved to the upright position.

7.   The  Wireless  pendant  is  waterproof  and  will  sustain  normal  use  in  the 

shower. It is waterproof, however it is not intended to be fully submersed 
in water for long periods of time. Therefore caution should be exercised 
when wearing it in the bath for lengthy periods.

8.   The Smart Dialler dials out and plays your pre-recorded message through 

a  standard  telephone  set.  If  you  have  an  older  telephone  set  and  it  has 
both Tone / Pulse settings, then set it to “Tone”.

9.  

PERSONAL RESPONSIBILITY TO TEST REGULARLY

 - ”It is your responsibility 

to  regularly  check  that  your  Smart  Dialler  is  functioning  correctly.  It 
is  therefore  essential  that  you  perform  a  function  test  at  least  once 
a  month,  by  pressing  the  red  buttons  on  your  Wireless  pendant  and 
ensuring that your Smart Dialler is operating correctly. You will need to 
advise the receivers of the calls that you are conducting a routine test. 

 

DO NOT

 test call “000”.

 

It is 

ALSO

 your responsibility to ensure that the batteries for the Smart 

Dialler and the Wireless pendant are in good working order. Your pendant 
comes installed with a 12 volt battery that may last up to 2 or more years.  
You can test your pendant battery by also pressing the 

YELLOW BUTTON

 

at regular intervals.

( 16 )

Summary of Contents for SMART DIALLER

























Reviews: