Cardin Elettronica 800/HL2518CL Manual Download Page 19

19

19

The 

CE conformity 

declaration for Cardin products is available in original language from the site 

www.cardin.it

 under the section "Standards and Certification".

Les déclarations de 

conformité CE

 des produits Cardin sont disponibles dans la langue originale sur le site 

www.cardin.it

 dans la section "normes et certificats".

Die 

CE-Konformitätserklärungen

 für die Cardin-Produkte stehen in der Originalsprache auf der Homepage 

www.cardin.it

 im Bereich "Normen und Zertifizierung" zur Verfügung.

Las declaraciones de 

conformidad CE

 de los productos Cardin se encuentran disponibles en el idioma original en el sitio 

www.cardin.it 

en la sección "normas y certificaciones". 

HL

230 Vac

11-01-2000

DCE006

CARDIN ELETTRONICA spa 

Via del lavoro, 73 – Z.I. Cimavilla 31013 Codognè (TV) Italy

Tel.: 

(+39) 04 38 40 40 11 

Fax:  

(+39) 04 38 40 18 31

e-mail (Italy): 

[email protected]

e-mail (Europe): 

[email protected]

http: 

www.cardin.it

Il costruttore: 

CARDIN ELETTRONICA S.p.A.

 

DICHIARA CHE L'APPARECCHIATURA DESTINATA AD ESSERE INSERITA IN 

 

MACCHINE E NON FUNZIONANTE IN MODO INDIPENDENTE:

Nome dell'apparato  

Motoriduttore HL251

Tipo di apparato 

Motoriduttore elettromeccanico interrato 230 Vac per cancelli a battente

Modello 

HL251 - HL2518 - HL251CL - HL2518CL

Marchio 

Cardin Elettronica

Anno di prima fabbricazione

  -

MODELLO

DATA

CODICE

SERIE

Dichiarazione di Incorporazione

(Direttiva Macchine 2006/42/EC, All. IIB)

è conforme alle disposizioni delle seguenti direttive comunitarie:

-  Direttiva 2014/30/EU (Compatibilità Elettromagnetica)
-  Direttiva 2014/35/EU (Bassa Tensione)

Codognè il 11/10/2016

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

DICHIARA CHE L'APPARECCHIATURA È IDEATA PER ESSERE INCORPORATA IN UNA MACCHINA O PER ESSERE ASSEMBLATA CON ALTRI 
MACCHINARI PER COSTITUIRE UNA MACCHINA CONSIDERATA DALLA DIRETTIVA 2006/42/CE E SUCCESSIVI EMENDAMENTI.
INOLTRE DICHIARA CHE NON È CONSENTITO METTERE IN SERVIZIO L' APPARECCHIATURA FINO A CHE LA MACCHINA NELLA QUALE SARÀ
INCORPORATA E DELLA QUALE DIVENTERÀ COMPONENTE NON SIA STATA IDENTIFICATA E DICHIARATA LA CONFORMITÀ ALLE DISPOSIZIONI 
DELLA DIRETTIVA 2006/42/CEE E SUCCESSIVI EMENDAMENTI.

Cardin Elettronica si impegna a trasmettere, in risposta a una richiesta adeguatamente motivata delle autorità nazionali, informazioni pertinenti sulla 
quasi-macchina in oggetto.

Persona autorizzata a costituire la documentazione tecnica

Ing. A. Fiorotto (Responsabile tecnico 

R&D Laboratory)

Rappresentante legale dell'azienda

Dott. Cristiano Cardin (Amministratore delegato

)

Summary of Contents for 800/HL2518CL





















Reviews: