Cardiac Science Powerheart AED G3 Plus 9390A, Operator'S And Service Manual

Page: 44 / 80

SmartGauge Battery Status Indicator Version 112-2025-109 B 3-10
SmartGauge Battery Status Indicator
The SmartGauge Battery Status Indicator has five LEDs, four green and one
red. The right four green LEDs display the remaining capacity of the battery
much like a fuel gauge. With use, the green LEDs gradually go out, from
right to left, as battery capacity decreases. When the green LEDs go out and
the red LED lights up, replace the battery.
Note: When the red LED initially lights up–upon lid opening or at any time
during a rescue–a “BATTERY LOW” prompt will be issued at once.
However, the AED is capable of delivering at least 9 more defibrillation
shocks after the first “Battery Low” prompt is issued.
When the AED battery cannot deliver any more shocks, the AED shows
“BATTERY LOW” on the text display, and the red battery LED illuminates.
To continue the rescue, leave the lid open, remove the battery, and replace
with a fresh battery. If battery replacement takes longer than 60 seconds, the
first rescue will be terminated and a second rescue will begin upon insertion
of battery.
Pads Indicator
The Pads LED lights up when the pads are:
◆
Not properly connected to the AED
◆
Not within operational specifications (cold, dried, damaged)
◆
Disconnected from the patient during a rescue
0% 100%