24
docs.carbide3d.com
Extras
Troubleshooting Guide
PROBLEM
POSSIBLE REASON
HOW TO RESOLVE
Machine will not
turn on.
Power switch on the control cabinet is not
turned on.
Power on the control cabinet.
Power to the machine is disabled.
Press the Machine Power button on the
front-right endplate (the blue button LED
will turn on).
Cables are not correctly plugged in.
Ensure all cables are correctly connected.
Spindle will not
turn on.
Power switch on the control cabinet is not
turned on.
Power on the control cabinet.
The spindle lock-out is enabled (spindle is
disabled).
Press the Spindle Lock-Out button on the
front-right endplate to enable the spindle
(the red button LED will turn on).
G-code not loaded or project not started.
Load the project and tool in Carbide
Motion, then start the project.
Machine stopped
working suddenly.
The fuse in the electronics cabinet may
have blown if the machine stops suddenly
and the buttons on the front-right
endplate do not light up.
Contact the tech support team at
for replacing the fuse.
Summary of Contents for Shapeoko HDM
Page 1: ...Shapeoko GETTING STARTED GUIDE HDM...
Page 2: ......
