15
12/18/2021 v1.0
Position the Spindle
Position the spindle directly above the BitSetter HDM:
1.
In Carbide Motion, click Jog in the menu bar at the top of the screen.
2.
On the
Jog screen
, click the Set Zero button.
3.
Click the Clear All Offsets button and then click Done.
4.
Jog the machine so that the spindle is directly above the BitSetter HDM.
Enable the BitSetter HDM in Carbide Motion
Enable the BitSetter HDM and save the spindle position in the settings menu:
1.
In Carbide Motion, click Settings in the menu bar.
2.
Click the Options tab in the Settings menu.
3.
In the
BitSetter section
, select the Enabled check box.
4.
Click the Use Current Location button to save the current X/Y location of the spindle.
5.
Click Ok to save and close.
Set the Post Processor in Carbide Create
In order for the BitSetter HDM to work, the post processor in Carbide Create must be correctly set:
1.
In Carbide Create, go to Edit > Select Post Processor in the menu bar.
2.
Select Carbide 3D Shapeoko.
3.
In the
Output Units dropdown list
, select Metric or Inch.
4.
Click Ok to save and close.
Summary of Contents for Shapeoko HDM
Page 1: ...Shapeoko GETTING STARTED GUIDE HDM...
Page 2: ......
