Carbide 3D HDZ 3.3, Step-By-Step Manual

Page: 4 / 26

Assembly Tip
Upon assembly it’s up to you if you use thread lock we suggest adding it after if any screws become loose. If you decide
to use thread lock use blue – i.e. light/medium grade.
The quickest and easiest way to fit the HDZ is to assemble the majority components to the HDZ prior to fitting the HDZ
to the Shapeoko.
Eccentric Nuts
Fit the two supplied M5 Eccentric threaded nuts and press them into the holes on the bottom of the HDZ. Rotate them
so the dimples face upwards - this is the loose position.