HD Spindle Mount
If you are using one of the matching HD spindle mounts please note you do not use the EZTram plate. Also note the
smaller central screw is used for opening the mount up. Once the spindle has been inserted into the mount please
remove this screw and re-tighten the 4 screws to mount.
With the HD Spindle Mount there is usually no need to tram the motor left/right, as it’s precision milled. Fit the HD Mount
to the holes on the front of the HDZ. Use the provided M6/M5 bolts.
Z Homing Switch
Fit your existing Z homing switch to the motor standoff.
Summary of Contents for HDZ 3.3
