Spindle Mount
●
Spindle Mount & screws
●
2 x M5 x 18mm screws
●
2 x M5 x 10mm screws
●
2 x M5 non threaded eccentric nut
The EZTram spindle mount is a great feature on the HDZ. It’s easy to fit and makes tramming your spindle a lot easier
utilizing 2 eccentric spacers.
Using your existing spindle mount and screws, fit it to the new EZTram mount, ensuring the recessed holes
accommodate the screw heads, and tighten. Feel free to use some thread lock here.
Summary of Contents for HDZ 3.3
