FOR TECHNICAL SUPPORT CALL
1800 658 111
WDS-4080P
MAINTENANCE
1.
Heed all warnings and use extreme
caution when performing this
cleaning operation.
2.
Set the conveyor belt speed control
knob to lowest feed setting. Avoid
contact with conveyor feed belt.
3.
Open the protective dust cover
to expose the sanding drum and
abrasive strip.
4.
Use a long belt cleaning stick to
distance your hands from the
rotating drum
5.
Turn on the machine, grip the belt
cleaning stick with two hands, rest
the cleaning stick on the casting
which houses the sanding drum.
Gently lower the cleaning stick
onto the rotating drum, moving the
cleaning stick from side to side to
remove the impacted sawdust.
6.
When cleaning is completed,
remove the stick, turn off the
machine, and close and latch the
protective dust cover.
O.
DRUM ABRASIVE STRIP CLEANING
During use, the sanding strip abrasive may become clogged with sawdust,
causing insufficient sanding, marring of workpiece, or burning of the
workpiece. With the machine off and unplugged from its power source,
occasionally check the condition of the abrasive strip on the sanding drum
for clogging. This should be done often, especially with resinous woods,
because material can become so packed into the abrasive that it cannot be
removed, and the abrasive strip must be replaced.
Fig. O
DRUM
ROTATION
BELT CLEANING
STICK
26
