CARBATEC.C OM.AU
BDS-1523H
WELCOME
A.
Belt/Disc Sander
B.
Side Plate x 2
C.
Top Cross Rail x 2
D.
Lower Cross Rail x 2
E.
Workpiece Table
F.
Hook & Loop Backing
G.
Sandpaper
H.
Feet
I.
Assembly bolts
J.
Disc Dust Port
K.
4" Dust Adapter
L.
Belt Dust Port
M.
Lock Shaft
N.
Miter Gauge
O.
Tools
A
The following items are provided in the shipping box:
WHAT’S IN THE BOX
I
N
O
L
J
E
F
D
C
B
G
H
K
M
3
1.
Remove parts from all of the cartons
and lay them on a clean work surface.
2.
Remove any protective materials and
coatings from all of the parts and the
spindle sander. The protective coatings
can be removed by spraying WD-40 on
them and wiping it off with a soft cloth.
This may need to be redone several
times before all of the protective coatings
are removed completely.
3.
Compare the items above to verify
that all items are accounted for before
discarding the shipping box.
DO NOT USE ACETONE, gasoline or lacquer
thinner to remove any protective coatings.
!
If any parts are missing, do not attempt to
plug in the power cord and turn “ON” the
spindle sander. The spindle sander can only
be turned “ON” after all the parts have been
obtained and installed correctly.
!
This belt/disc sander will require a minimal amount of assembly.
