CARBATEC.C OM.AU
BDS-1523H
ASSEMBLY
ASSEMBLY
To keep freight costs to a minimum and reduce damage in transport, this belt/
disc sander will require a significant amount of assembly and will require some
heavy lifting. Ensure you have additional people to assist with lifting etc.
• The Belt/Disc Sander is not pre-assembled. After unpacking, the machine
must be installed prior to use.
• Transport the Belt/Disc Sander in its packing crate to a place near its final
installation site before unpacking it.
• If the packaging shows signs of possible transport damage, take the
necessary precautions not to damage the machine when unpacking.
• If any damage is discovered, the carrier and/or shipper must be notified of
this fact immediately to establish any claim which might arise.
A.
PLACEMENT LOCATION
Consider anticipated workpiece sizes and additional space needed for auxiliary
stands, work tables, or other machinery when establishing a location for this
machine in the shop. See dimensions on page 12, for reference.
B.
STAND ASSEMBLY
1.
Using side plates (Fig. B1), upper
(Fig. B2) & lower (Fig. B3) cross rails
and supplied bolts. Assemble stand
as shown.
Fig. B
NOTE: It is recommended to
assemble all screws finger tight first.
Fig. B
1
3
2
13
