CARBATEC.C OM.AU
BDS-1523H
ASSEMBLY
D.
SANDER ASSEMBLY
1.
Carefully set the sander onto the
stand assembly, aligning the four
holes on the legs of the stand with
the holes on the sander base.
Fig. D1
2.
Use supplied bolts to attach the
stand to the sander base. Bolts will
thread directly into the base.
Fig. D2A
3.
Install the belt dust port using
supplied hardware.
Fig. D3 & D4
Fig. D1
Fig. D3
Fig. D4
Fig. D2
A
15
