Capron Sunlight A68 2018, Instruction Manual

Page: 96 / 138

Sanitary fittings
96
2999828 - 05/18 - EHG-0012-00EN
10

Press both push-button locks (Fig. 83,2) simultaneously with your thumb
and open the flap for the sewage tank.

Swivel flap fully upwards and carefully set on the exterior wall. The flap
is kept open magnetically.

Pull the retaining clip (Fig. 84,2) upwards and pull out the sewage tank
(Fig. 84,1).

Completely empty the sewage tank at disposal stations that are espe-
cially provided for this purpose.

Actuate the aeration knob on the sewage tank with your thumb to empty
it completely.
10.5.3 Winter operation

Do not use anti-freeze. Anti-freeze can damage the toilet.
If the toilet, the water tank and the sewage tank (cassette) are in a frost-pro-
tected part of the vehicle, the toilet can also be used in the winter.
If the toilet, the water tank and the sewage tank (cassette) are not in a frost-
protected part of the vehicle, empty the water tank, the sewage tank and the
water pipes if there is a risk of frost. This prevents frost damage.
10.5.4 Temporary lay-up

If the toilet is not to be used for an extended period, empty the water
tank, the sewage tank and the water pipes.

Empty the water tank.

Flush the toilet until no more water runs into the toilet. Note that the
pump can get damaged after one minute at the latest if it runs dry.

Empty the sewage tank.

Rinse the sewage tank thoroughly.

Leave the drainage neck on the sewage tank open.

Let the sewage tank dry for as long as possible.
Laying up the toilet: