Capron Sunlight A68 2018, Instruction Manual

Page: 101 / 138

Care
2999828 - 05/18 - EHG-0012-00EN
101
11

Brush blinds with a soft brush or vacuum with the brush attachment of
the vacuum cleaner. Grease or stubborn dirt may be removed with a
mild soap at 30 °C (curd soap).

Brush Roman shades with a soft brush or vacuum with the brush attach-
ment of the vacuum cleaner. Grease or stubborn dirt may be removed
with a mild soap at 30 °C (curd soap).

Unrolled seat belts can be cleaned with warm soapsuds. The seat belt
must be completely dry before being rolled up.
11.2.1 Refrigerator

Clean the exterior and interior of the refrigerator with a soft cloth and
lukewarm water (containing a mild cleaning agent).

Then, wash the refrigerator out with clear water and let it dry.

Keep the defrosted water drain channel free of sediments.

To prevent material changes, do not use any soap, nor any sharp, gran-
ular or soda containing cleaning agents.

Keep oil and grease away from the door seal.
11.3 Stainless steel surfaces

Do not clean the stainless steel surfaces with bleaching agents, with
products that contain chloride or hydrochloric acid, baking powder nor
with silver polish.

Do not use scouring agent nor coarse sponges.

Prior to cleaning, test the suitability of the cleaning product for the sur-
face on an unobtrusive spot.

Dry the surfaces thoroughly after cleaning to prevent scale deposits.

In the case of brushed stainless steel surfaces, wipe in a direction of the
grinding.

Treat the stainless steel surface with a soft cleaning cloth and with a
special stainless steel cleaner.

Rinse the stainless steel surface and dry it with household wipes.

Clean the stainless steel surface with an ordinary household sponge
and with cleanser.

Rinse the stainless steel surface and dry it with household wipes.

Clean the stainless steel surface with a soft cleaning cloth and soapy
water or a glass cleaning agent.

Rinse the stainless steel surface and dry it with household wipes.

Treat the stainless steel surface with a baking soda solution. Allow the
baking soda solution to work in for 15 minutes.

Rinse the stainless steel surface and dry it with household wipes.
Removing scratches from
the surface:
Removing stubborn dirt and
burnt-in fat:
Removing fingerprints:
Removing coffee or tea
stains: