Capron Sunlight A68 2018 Instruction Manual Download Page 87 | Manualshive

Page: 87 / 138

background image

Sanitary

fittings

2999828 - 05/18 - EHG-0012-00EN

87

10

10 Sanitary

fittings

Chapter overview

This chapter contains instructions regarding the sanitary fittings of the vehi-
cle.

10.1 Water supply, general



Fill water tank from supply systems that have been verified to provide

drinking water quality.



Only use such hoses or containers when filling that have been ap-

proved for use with drinking water.



Thoroughly rinse filling hose or container with drinking water before

use (2 to 3 times capacity).



Empty filling hose or container completely after use and close open-

ings of the filling hose or container.



Water left standing in the water tank or in the water pipes becomes

undrinkable after a short period. Therefore, before each use of the ve-
hicle, thoroughly clean the water pipes and the water tank. After each
use of the vehicle completely empty the water tank and the water
pipes.



In the case of lay-ups lasting more than a week disinfect the water

system before using the vehicle (see chapter 11).



If the vehicle is not used for several days or if it is not heated when there
is a risk of frost, empty the entire water system. Make certain that the
water pump is switched off. Otherwise, the water pump will overheat and
may get damaged. Leave the water taps on in central position. Leave all
drain cocks open. Frost damage to appliances, frost damage to the vehi-
cle and deposits in water-carrying components can be avoided in this
way.



The water pump will overheat without water and can get damaged after
one minute at the latest. Never operate water pump when the water tank
is empty.

The vehicle is equipped with a fitted water tank. An electric water pump
pumps the water to the individual water taps. Opening a water tap automati-
cally switches on the water pump and pumps water to the tap.
The waste water tank collects the waste water. The water level in the water
and waste water tanks can be checked on the panel.



Before using the water fittings, the 12 V power supply on the panel must
be switched on. Otherwise the water pump will not work.

The submerged pump is located in the water tank.

Position of the water

pump

«
...
85
86
87
88
89
...
»

Summary of Contents for Sunlight A68 2018











































































































































Reviews:

No comments

Related manuals for Sunlight A68 2018

Avantgarde 2019

Brand: Compass Pages: 104

Brand: GMC Pages: 215

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands