Capron Sunlight A68 2018, Instruction Manual

Page: 102 / 138

Care
102
2999828 - 05/18 - EHG-0012-00EN
11

Clean the stainless steel surface with an ordinary household sponge
and with cleanser. If necessary, use a soft cleaning cloth and stainless
steel cleaner.

Rinse the stainless steel surface and dry it with household wipes.
11.4 Water system
11.4.1 Cleaning the water tank

Empty the water tank and close the drainage opening.

Remove the cap of the water tank.

Fill water tank with water and some washing-up liquid (do not use any
scourers).

Using a trade standard brush for washing dishes, scrub the water tank
until there is no longer any visible deposit.

Scrub also the pump housing.

If possible, clean fresh water sensors through the cleaning openings by
hand.

Rinse water tank with copious amounts of drinking water.

If, due to the design of the water tank, it is not possible to clean the wa-
ter tank mechanically: Use a suitable chemical cleaning agent.
The authorised dealers would be happy to assist you in choosing a suitable
cleaning agent.
Follow the cleaning agent manufacturer's instructions.
11.4.2 Cleaning the water pipes

Only use suitable cleaning agents as sold by the specialist trade.

The cleaning agent must meet national regulations and be approved (if
required).

Collect any emerging mixture of water and cleaning agent for correct dis-
posal.

Empty the water system.

Close all drainage openings and drain cocks.

Fill mixture of water and cleaning agent into the water canister or water
tank.
Observe the manufacturer's instructions regarding the mixing ratio.

Open the drain cocks one by one.

Leave the drain cocks open until the mixture of water and cleaning
agent has reached the respective drain.

Close the drain cocks.

Set all the water taps to "Hot" and open them.

Leave the water taps open until the mixture of water and cleaning agent
has reached the drain.

Set all water taps to "Cold" and open them.
Removing rust stains: