Capron Sunlight A68 2018, Instruction Manual

Page: 38 / 138

Living
38
2999828 - 05/18 - EHG-0012-00EN
6
6.4.3 Cabin black-out shade

Open cabin black-out shade before commencing the journey.
Fig. 14 Cabin black-out shade on
side pane Fig. 15 Cabin black-out shade on
windscreen

Take cabin black-out shade out of the storage compartment above the
driver's cabin.

Fasten cabin black-out shade on one side of the driver's cabin. In order
to do this, fasten two snap fasteners (Fig. 14,2) behind the side pane, on
the B column.

Guide loop (Fig. 14,1) over the handle above the side pane and fasten
with snap fasteners.

Push pockets (Fig. 15,1) of cabin black-out shade over the two sun vi-
sors.

On the other side of the driver's cabin: also fasten the cabin black-out
shade with loop on the handle and snap fasteners on the B column.

Release the cabin black-out shade at all fastening points.

Store cabin black-out shade in the storage compartment above the driv-
er's cabin.
6.5 Skylights
Skylights with and without forced ventilation are installed in the vehicle. The
smaller skylights in the living area and in the bathroom are equipped with
forced ventilation.

The apertures for forced ventilation must always be kept open. Never
cover or block forced ventilations with objects such as e.g. a winter
mat. Keep forced ventilations clear of snow and leaves.

Do not keep blinds closed over a longer period of time as that can cause
increased material wear.

If the blind or the Roman shade is completely closed, exposure to direct
sunlight can cause heat to accumulate between the blind/the Roman
shade and the skylight. The skylight could be damaged. For that reason,
close the blind/Roman shade only 2/3 of the way in direct sunlight. Open
the skylight slightly or move it to ventilation position.
Closing:
Opening: