Capron Sunlight A68 2018 Instruction Manual Download Page 10 | Manualshive

Page: 10 / 138

background image

Safety

10

2999828 - 05/18 - EHG-0012-00EN

2

2.2 General



The oxygen in the vehicle interior is used up by breathing and the use

of gas operated appliances. That is why the used air must be replaced
permanently. For this purpose, forced ventilation options (e.g. sky-
lights with forced ventilation) are fitted to the vehicle. Never cover or
block forced ventilations from the inside or outside with objects such
as e.g. a winter mat. Keep forced ventilations clear of snow and
leaves. There is a danger of suffocation due to increased CO

2

levels.



Observe the headroom of the doors.



As far as the fitted appliances (heater, cooker, refrigerator, etc.) and the
base vehicle (engine, brakes, etc.) are concerned, the instruction manu-
als are authoritative. It is imperative that they be observed.



Fitting accessories or special equipment can alter the dimensions,
weight and road behaviour of the vehicle. Some of the add-on parts
must be entered in the vehicle documents.



Only use wheel rims and tyres which are approved for the vehicle. Infor-
mation concerning the size of the approved wheel rims and tyres is in-
cluded in the vehicle documents or can be obtained from authorised
dealers and service centres.



Firmly apply the handbrake when parking the vehicle.



When leaving the vehicle, it is imperative that all doors, external flaps
and windows are closed.



Always carry the legally prescribed equipment (e.g. first aid kit, warning
vest, hazard warning triangle etc.) with you. The regulations of the host
country apply when travelling abroad.



The vehicle may only be driven by drivers who hold a driving licence
which is valid for the respective vehicle class.



When selling the vehicle, hand over all instruction manuals for the vehi-
cle and the fitted appliances.

2.3 Road

safety



Before commencing the journey, carry out a functional check of indi-

cating and lighting equipment, the steering and the brakes.



If the vehicle has been stationary for a long period (approx.

10 months) have the braking and gas systems checked by an author-
ised specialist workshop.



Before commencing the journey and after short interruptions of the

journey, ensure that the entrance step is completely retracted.



Before commencing the journey, rotate all swivel seats in the direction

of travel and lock in position. During the journey, the swivel seats must
remain locked in place in the direction of travel.



Carefully store all moving parts and all loose objects before starting

your journey.



Before commencing the journey, store the flat screen securely.

«
...
8
9
10
11
12
...
»

Summary of Contents for Sunlight A68 2018











































































































































Reviews:

No comments

Related manuals for Sunlight A68 2018

Brand: Taxa Outdoors Pages: 65

Brand: Bailey Pages: 31

Brand: Swift Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands