25
Error Code 03: No speed sensor signal
Check whether the sensor connectors are plugged correctly and are not damaged.
Error Code 05: Overcurrent protection
E05: The self-protection system is triggered by excessive current caused by overload.
Make sure the treadmill is neither overloaded (weight) nor jammed. If there is a burning smell occuring from
the motor, switch off and replace.
Safety Off
Make sure the saftey pin sits correctly and is not dámaged.
No display
Make sure all cable connections are in proper condition and the device is powered on and connected to the
mains socket. Check for the fuses.
Pulse display does not work or shows obviously faulty values.
Make sure the sensor cables are properly connected and make sure to properly grasp the sensor areas and
your hand palms contact the sensor.
Motor does not start
Check all cable connections, mains connection, fuses, power switch and check for any of the above mentioned
error codes.
Disposal Considerations
According to the European waste regulation 2012/19/EU this symbol on the product or on its packaging
indicates that this product may not be treated as household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this pro-
duct is disposed of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local council or your
household waste disposal service.
Declaration of Conformity
Producer
: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/35/EU
(LVD)
2004/108/EC (EMC)
2011/65/EU
(RoHS)
Summary of Contents for 10030372
Page 1: ...10030372 Pacemaker Touch ...
