Capintec CAPTUS 3000, Owner'S Manual, Page: 210 / 338

CAPINTEC, INC. CAPTUS
®
3000
4. To delete all the patients at once, simply click the icon. You will be prompted to
confirm the deletion. Figure 9-52 appears.
Figure 10-35
5. Click the button or press the Y key to confirm the deletion. Otherwise, click
the button or press the N key.
Making Measurements
CAUTION: Calibration is recommended before making any measurements. Refer to
CHAPTER 5: QUALITY ASSURANCE TESTS; SECTION: AUTO
CALIBRATION.
•
Before making any measurements on a patient, verify that all required patient information
has been entered.
•
Make sure the default settings on the Edit Patient screen and the Setup screen are
appropriate. The values on the Edit Patient screen override those on the Setup screen.
1. To select a patient for the test, click on that record in the
Patient Directory box on Figure
10-27 I 125 Blood Volume Test Main Screen. The Patient Status box will show the
current status of the patient. If this box reads, “All Data Has Been Entered”,
the button at the bottom of the screen is accessible and the test
can be started. If data is partially entered, the button is
inaccessible.
Note: If the Patient Status box shows “Data Partially Entered”, no measurements can
be made until all the required information is entered. Refer to Editing Patient
Information on page 10-24.
2. To begin the measurements, click the button or press Alt+C . The
screen appears as shown in Figure 10-37.
Note: If calibration has not been performed, you will be prompted with the screen as
shown in Figure 10-36. If you calibrate now, the screen will return after calibration
to the screen shown in Figure 10-37.
10-26 LAB TESTS November 13