Capintec CAPTUS 3000 Owner'S Manual Download Page 181

Page: 181 / 338

CAPINTEC, INC.

CAPTUS

3000

Figure 9-33 Patient Report

For each measurement, the following information is displayed:

•

Measurement at x days: Elapsed Time in days

•

Time: Date/time of the measurement

•

Factor: Conversion factor in cpm/µCi; (in cps/Bq for Becquerel mode)

•

Room Background: Background measurement

•

Organ: Net cpm (cps in Becquerel mode) for the measured organ. Includes

counts for the first and second repetition

•

Comments: User comments, as necessary

•

Intake: Calculated intake displayed in µCi (MBq in Becquerel mode).

Note: If

the Screening Level was entered, “BELOW SCREENING LEVEL” or “ABOVE
SCREENING LEVEL” will be displayed.

Click the

button to print a detailed report for the patient.

To save the displayed report or summary, click the

button or press

Alt+S

. The Save As box appears as shown in Figure 9-34. Reports are saved as an

RTF file in the Reports folder by default.

July 14

ABSORBED DOSE ALERT

9-27

Summary of Contents for CAPTUS 3000



















































































































































































































































































































































Search results

Summary of Contents for CAPTUS 3000

Reviews:

Capintec CAPTUS 3000, Owner'S Manual, Page: 181 / 338

Search results

Summary of Contents for CAPTUS 3000

Reviews: