Canon XF200 Instruction Manual Download Page 31

Page: 31 / 246

Using the Menus

Eng

lis
h

Rearranging Menu Settings

1 Open the My Menu [Move] screen.

[

My Menu]

[Edit]

[Move]

2 Push the joystick up/down to select the setting you want to move and

then press SET.

• An orange

]

icon will appear next to the setting you selected to

move.

3 Push the joystick up/down to move the setting to the desired position and then press SET.

Removing Menu Settings

1 Open the My Menu [Delete] screen.

[

My Menu]

[Edit]

[Delete]

2 Push the joystick up/down to select the setting you want to remove and

then press SET.

3 Select [OK] and then press SET twice.

Resetting the My Menu Submenu

1 Reset all the menu settings registered to the My Menu submenu.

[

My Menu]

[Edit]

[Reset All]

2 Select [OK] and then press SET twice.

[

My Menu]

[Edit]

[Move]

[

My Menu]

[Edit]

[Delete]

[

My Menu]

[Edit]

[Reset All]

COP

Summary of Contents for XF200























































































































































































































































Search results

Summary of Contents for XF200

Reviews:

Related manuals for XF200

Brands by name

Popular brands

Canon XF200, Instruction Manual

Search results

Summary of Contents for XF200

Reviews:

Related manuals for XF200

Brands by name

Popular brands