WX6000 / SX6000
User Commands
- 63 -
* After setting the status of the button to be pressed down, send a command from the PC to release the pressed
status after predetermined time. .
* Although emulation parameters for both values and function are available for the common key for 1/DZOOM+,
3/VOL+, 4/DZOOM-, 6/VOL- and 9/MUTE, there is no difference in operation so that it works in the same manner
as when the "Common key" on the remote controller is pressed.
In other words, depending on the status of UI, it acts as a value key or a function key.
Environment
Power
Input
OFF ON
PM
D-RGB A-RGB
COMP
HDMI
None
- -
Response
"i:OK" is returned when the button press request has been acknowledged successfully.
(It does not indicate if the operation for the pressed button was executed properly.)
Description
(1) This emulates pressing of the remote control buttons for controlling the projector.
(2) With the emulation of the remote control operations, the functions of the buttons
corresponding to the parameters cannot necessarily be executed.
Emulation simply consists in emulating the pressing of the buttons.
(3) A parameter with '+REP' signifies "button press start". (This is the same as the status in
which the remote control button is held down.)
Be absolutely sure to send the '*-REP' parameter, and end the button pressing last of all.
The button pressing is ended in the cases below as well.
<1> When a side control or remote control button has been operated
<2> When a command has been received
(4) The combined use key to 1/DZOOM+, 3/VOL+, 4/DZOOM-, 6/VOL-, 9/MUTE works as a
numerical key or function key by a state of UI.
Example
Setting
> RC POWER
< i:OK
* Commands are indicated by ">", and responses are indicated by "<".
