WX6000 / SX6000
User Commands
- 7 -
Other
Transmission recognition
On the receiving side (the Projector), the data that is able to be received within the character interval
of Tc is held, and the transmission is considered received when the delimiter is received.
If the character interval received exceeds the Tc or if a delimiter is not received within 256 characters,
all data already received is lost, and the mode is reset to standby to receive commands again.
Parameter value
The <Parameter value> is defined as shown below.
<Parameter value>
:=
<Value 1>
▽
,
▽
<Value 2>
▽
… ,
▽
<Value n>
<Value> := <Numerical value> | <ID> | “<Character string>”
<Numerical value> := [<Sign>] <Decimal character string (Min. 1 character to Max. 5 characters)>
* The range of valid values is from -32768 to 32767.
<ID> := 1 or more ASCII characters (20h to 7Eh)
<Character string> := 0 or more ASCII characters (20h to 7Eh)
