WX6000 / SX6000
User Commands
- 58 -
MUTE
Mute control
Format
MUTE=<Mute control parameter: ID>
GET
□
MUTE / ?
△
MUTE
<Mute control parameter: ID>
ON
Disables the audio / beep sound.
OFF
Enables the audio / beep sound.
Environment
Power
Input
OFF ON
PM
D-RGB A-RGB
COMP
HDMI
None
X O X
-
Response
"i:OK" is returned if the parameter was set properly.
For '
GET MUTE
' or '
?MUTE
', current mute setting is returned as
'g:MUTE=<Mute control parameter: ID>'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to set the sound output muting to ON or OFF.
(2) Mute control enables simultaneous control of the audio and beep sound.
(3) This command is identical to pressing the MUTE button on the remote control.
(4) The mute setting is always "OFF" when the power has just been turned on.
(5) The volume can be set even when it is on "MUTE".
(6) The current muting status can be acquired using the applicable GET command. ("
GET MUTE
")
Example
Setting
> MUTE=ON
This mutes the volume.
< i:OK
Reference
> GET MUTE or ?MUTE
This retrieves the volume state.
< g:MUTE=ON
* Commands are indicated by ">", and responses are indicated by "<".
