WX6000 / SX6000
User Commands
- 45 -
HDMI_OVSCAN
HDMI overscan setting
Format
HDMI_OVSCAN=<HDMI overscan setting parameter:ID>
GET
□
HDMI_OVSCAN / ?
△
HDMI_OVSCAN
<HDMI overscan setting parameter:ID>
OFF
Turns overscan to OFF
ON
Turns overscan to ON
Environment
Power
Input
OFF ON
PM
D-RGB A-RGB
COMP
HDMI
None
X O X
-
-
-
O
O
Response
"i:OK" is returned if HDMI overscan was set properly.
For '
GET HDMI_OVSCAN
' or '
?HDMI_OVSCAN
', current HDMI overscan setting status is returned as
'
g:HDMI_OVSCAN=<HDMI overscan setting parameter:ID>
'
For details on other responses, refer to the "Error List".
Description
(1) This switches the HDMI overscan setting to [OFF] / [ON].
(2) This command functions in the same way as when "Display setting" - "HDMI overscan" are
selected on the menu.
(3) The current HDMI overscan setting can be acquired using the applicable GET command ("
GET
HDMI_OVERSCAN
").
(4) The setting is fixed to [OFF] depending on the setting status of other functions or the status of
the input signal.
Example
Setting
> HDMI_OVSCAN=ON
This sets the HDMI overscan to ON.
< i:OK
Reference
> GET HDMI_OVSCAN or ?HDMI_OVSCAN
This retrieves the setting status of the HDMI overscan setting.
< g:HDMI_OVSCAN=ON
* Commands are indicated by ">", and responses are indicated by "<".
