WX6000 / SX6000
User Commands
- 55 -
MAIN
Side control operation emulation
Format
MAIN
□
<Side control emulation button parameters:ID>
<Side control emulation button parameters:ID>
POWER POWER
button
POWER_OFF POWER
button pressed twice
MENU MENU
LENS LENS
INPUT INPUT
UP UP
UP+REP
Hold down the UP button
*-REP
Release the button
DOWN DOWN
DOWN+REP
Hold down the DOWN button
*-REP
Release the button
LEFT LEFT
LEFT+REP
Hold down the LEFT button
*-REP
Release the button
RIGHT RIGHT
RIGHT+REP
Hold down the RIGHT button
*-REP
Release the button
OK OK
* After setting the status of the button to be pressed down, send a command from the PC to release the
pressed status after predetermined time.
Environment
Power
Input
OFF ON
PM
D-RGB A-RGB
COMP
HDMI
None
- -
Response
"i:OK" is returned when the button press request has been acknowledged successfully.
(It does not indicate if the operation for the pressed button was executed properly.)
Description
(1) This emulates the pressing of the side control buttons for controlling the projector.
(2) With the emulation of the side control operations, the functions of the buttons corresponding
to the parameters cannot necessarily be executed. Emulation simply consists in emulating the
pressing of the buttons.
(3) A parameter with '+REP' signifies "button press start."
(This is the same as the status in
which the side control button is held down.)
Be absolutely sure to send the '*-REP' parameter, and end the button pressing last of all.
The button pressing is ended in the cases below as well.
<1> When a side control or remote control button has been operated
<2> When some command has been received
Example
Setting
> MAIN MENU
< i:OK
* Commands are indicated by ">", and responses are indicated by "<".
