Canon W8200 User Manual Download Page 18

Page: 18 / 196

Before Using the Printer

1-2

Printer Part Names

Printer Main Unit

Front View

a Upper cover

Open to install the printhead or to remove paper jams inside the printer.
(

P.6-21, P.7-22)

b Left cover

Open to replace the mist filter. (

Filter Instructions provided with filter)

c Tray

Used to feed cut sheets and to receive printed output from the printer.
Open to load roll media. (

P.2-9)

d Roll media tray

Holds the roll holder and roll media. Pull out to load roll media.
(

P.2-10)

e Output Stacker

A cloth tray to hold printed media output from the printer.

f Stand

A stand mounted on four casters to support the printer main unit. The
output stacker, or optional Media Take-up Unit, can be mounted inside
the stand.

Summary of Contents for W8200





































































































































































































Search results

Summary of Contents for W8200

Reviews:

Related manuals for W8200

Brands by name

Popular brands

Canon W8200, User Manual

Search results

Summary of Contents for W8200

Reviews:

Related manuals for W8200

Brands by name

Popular brands