Canon W8200, User Manual

Page: 103 / 196

Menu Settings Summary Tables
11
5-11
Auto Cut
*4
Yes*, Print Cut Line, No
Selects automatic cutting when
printing with roll media. If you select
“Print Cut Line”, a line prints to guide
manual cutting.
Interface Setup
IP Setting
IP Address
Subnet Mask
Default G/W
Allows you to set the network
information for a TCP/IP network
interface. After making each TCP/IP
settings, be sure to execute “Regis.
Settings” to enable the settings.
EOP Timer
10, 30 sec.; 1, 2, 5, 10, 30,
60 min.* Sets the job timeout setting for the
printer.
System Setup
Cutter Enable*, Disable
Switches the roll media cutter on and
off.
Buzzer On*, Off
Switches the buzzer function off and
on. When the buzzer is on, it buzzes
when an error occurs.
Sleep Timer off, 5, 10, 20*, 30, 40, 50, 60 min.
Sets the time interval for the printer to
remain idle before it enters the sleep
mode. If set off, the printer never
enters the sleep mode.
Replace P.head No*, Yes
Sets the printer in the replace printhead
mode.
Adjust Printer
Auto Print On*, Off
Automatically prints Print Pattern A
after replacing the printhead.
Print Pattern A
Adj. Setting A1 ~ A5
Adj. Setting B1 ~ B5
Adj. Setting C1 ~ C5
Adj. Setting D2 ~ D5
Adj. Setting E2 ~ E5
Allows you to adjust the alignment of
the printhead to correct color and the
direction of printing. Print Patterns A1
to E5 for each step of adjustment.
Menu Item Available Settings Function