Canon W8200 User Manual Download Page 106

Page: 106 / 196

Using the Operation Panel

5-14

Test Print

Status Print

—

Prints a complete list of all printer
settings.

Nozzle Check

—

Prints the nozzle check pattern.

Information

Ink

—

Displays the amount of ink supply
remaining.

Version

—

Displays the version numbers for the
printer unit and the firmware.

RAM

—

Displays the memory capacity of the
printer.

Interface

—

Displays the names of the interfaces
that can be used.

Ext. Interface

—

Displays the name of the interface that
can be used at the expansion slot.

MAC Address

—

Displays the MAC address assigned
to the computer.

Error

—

Displays the most recent error
message.

*1. Displayed only when “Roll Media” selected as the Media Source and “Cutter”

is enabled.

*2. Displayed only when “Enable” is selected for “Take-up Reel”.
*3. Displayed only when “Cut Sheet” is selected as the Media Source.
*4. Displayed only when “Roll Media” is selected as the Media Source.

Menu Item

Available Settings

Function

Summary of Contents for W8200





































































































































































































Search results

Summary of Contents for W8200

Reviews:

Related manuals for W8200

Brands by name

Popular brands

Canon W8200, User Manual

Search results

Summary of Contents for W8200

Reviews:

Related manuals for W8200

Brands by name

Popular brands