Additional Information
165
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
Total play time is too long
- The story cannot be converted when its total playback time exceeds 2 hours and 30 minutes.
Reduce the number of scenes to convert.
Unable to recognize the data
- You transferred data to the camcorder recorded in a different television system (PAL or
SECAM). Play back the recordings with the device originally used to record them.
Unable to recover data
- Could not recover a corrupted file. Save your recordings (
0
119) and initialize the memory
using the [Complete Initialization] option (
0
Unsupported gallery data detected. Cannot record or edit. Delete gallery data?
- The gallery data on the selected memory is not supported by this camcorder. Playback is pos-
sible but you recording and editing is not. Touch [Yes] to erase the gallery data and enable
recording. If the gallery data is erased, the camcorder that recorded the movies will not be
able to play them back.
USB Connection Do not disconnect the power source. Cannot write data with this connection.
To write data to the camcorder, connect the compact power adapter then reconnect the
camcorder and computer. Do not disconnect the USB cable unless you first use the computer
to safely end the connection.
- The camcorder cannot be operated while it is not being powered by the compact power
adapter and is connected to a computer with the supplied USB cable. In addition, scenes can-
not be written back and music files cannot be transferred to the camcorder. To avoid corrupt-
ing the data in the camcorder's memory, use the computer's Safely Remove Hardware
function to end the connection and disconnect the USB cable before using the camcorder.
- To be able to write back scenes and to transfer music files to the camcorder, use the com-
puter's Safely Remove Hardware function to end the connection, disconnect the USB cable,
power the camcorder using the compact power adapter and only then connect it to the com-
puter again.
USB Connection Do not disconnect the power source. Do not disconnect the USB cable unless
you first use the computer to safely end the connection.
- When the camcorder is in
mode and is connected to the computer with the supplied
USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source
while this message appears may result in permanent loss of the recordings in the camcorder.
Use the computer's Safely Remove Hardware function to end the connection and disconnect
the USB cable before using the camcorder.
- To be able to write back scenes and to transfer music files to the camcorder, power the cam-
corder using the compact power adapter and only then connect it to the computer using the
supplied USB cable.
COP
Y
