Canon Vixia HF R20, Instruction Manual

Page: 164 / 188

164 Š
Additional Information
/ Some scenes could not be converted
- Among the scenes selected for conversion to SD there are scenes recorded with another
device. When converting scenes to SD, leave out scenes recorded using another device.
- Scenes recorded with another device cannot be converted. Those scenes were not converted
but the other scenes selected for conversion were converted.
Some scenes could not be deleted
- Movies that were protected/edited with other devices cannot be deleted with this camcorder.
Some scenes were recorded using another device and cannot be copied.
- Scenes that were not recorded with this camcorder cannot be copied.
Task in progress. Do not disconnect the power source.
- The camcorder is updating the memory. Wait until the operation ends and do not disconnect
the compact power adapter or remove the battery pack.
There are no scenes with the selected rating
- The story does not contain any scenes with the selected ratings. Select scenes and rate them
(
0
87) or select a different rating for the operation.
This memory card contains scenes. Delete all scenes to use relay recording.
- Save your movies (
0
119) if necessary, and delete all the movies from the memory card
(
0
56).
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or
edited on a computer.
This scene was recorded using another device and cannot be copied.
- Scenes that were not recorded with this camcorder cannot be copied.
To record video on this memory card, it is recommended to use only the XP+/SP/LP recording
modes
- Movies may not be recorded correctly on this memory card if the recording mode is set to
MXP or FXP mode (
0
59).
To use the wireless function, insert the Eye-Fi card into slot B.
- You may have inserted the Eye-Fi card into memory card slot
X
. Insert it into memory card
slot
Y
.
To use this function, switch out of mode
- You pressed a button that cannot be used in mode. Press to set the camcorder
to flexible recording mode.
Too many photos. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos
on the memory card to fewer than 2,500 photos (Windows computers), or 1,000 photos (Mac-
intosh computers).
COP
Y