Canon TS3500 Series, Online Manual

Page: 301 / 372

Printer Does Not Pick up or Feed the Paper/"No Paper" Error
Check1
Make sure paper is loaded.
Loading Paper
Check2
When loading paper, consider the following.
• When loading two or more sheets of paper, align the edges of the sheets before loading the paper. •
• When loading two or more sheets of paper, make sure the paper stack does not exceed the paper load •
limit.
However, paper may not feed correctly at the maximum capacity, depending on the type of paper or
environmental conditions (very high or low temperature and humidity). In such cases, reduce the amount of
paper you load at a time to less than half of the paper load limit.
• Always load the paper in portrait orientation, regardless of the printing orientation. •
• When you load the paper, load the paper with the print side facing UP. Align the paper stack against the •
right side of the rear tray and slide the paper guide so that it just touches the left edge of the stack.
Loading Paper
Check3
Is paper too thick or curled?
Unsupported Media Types
Check4
Make sure media type and paper size settings match with loaded paper.
Check5
Make sure that there are not any foreign objects in the rear tray.
If the paper tears in the rear tray, see What to Do When Paper Is Jammed to remove it.
If there are any foreign objects in the rear tray, be sure to turn off the printer, unplug it from the power supply,
then remove the foreign object.
301